The Hydraulic Pro Lite is lighter and has a thinner hydraulic base than the Hydraulic Pro. This chair swivels 360 degrees, on top of a heavy-duty hydraulic pump with a beautiful chrome finish. The thinner base allows the operator to get in closer to the client. The back rest can be manually adjusted from a flat position to an upward 65 degree angle. The leg rest can be manually adjusted from a flat position to a downward 45 angle. For easy transitioning, it has fully removable arms. For a face down position, simply remove the pillow to expose a comfortable face hole.
The TATSoul Travel Armrest fuses the premium quality expected of TATSoul products with easy portability. The Travel Armrest is easily height adjustable and offers a 360° cushion angle range. The TATSoul Travel Armrest is designed to maximize function and durability, while remaining compact enough to conveniently fit into its accompanying travel bag. Pair it with a TATSoul Portable Tattoo Table for a complete travel set.
Product Features:
- Ultra portable without compromising on quality
- Comes with a free travel bag
- Easily height adjustable
- 360° cushion swivel range
- Independently adjustable legs
- Heavy-duty hydraulic lift pumps
- Leek fiberglass hydraulic pump cover
- Manually adjustable back rest and leg rests
- Removable arm rests and pillow
- Facial hole for face down positioning
- Rotates 360 lifetime structure and frame warranty (does not apply to wear and tear parts such as vinyl, hydraulic pump or click locks)
Specifications:
- Upholstered in PVC vinyl
- Hydraulic pump has a 1.58" shaft diameter with a 7.7" strokeheight adjustment from 24 to 30back rest adjustment from 0 flat to 65 upward incline
- Leg rests adjustment from 0 flat to 45 downward decline
- Rotates in horizontal direction and locks in location with foot level
- Capacity 400 lbs
- CLICK HERE FOR INSTRUCTION MANUAL
Product Dimensions:
*default position: bed completely flat, lowest height, w/arms
*all heights measured from ground to top of seat cushion
- Default position: 69 x 32 x 24 (l x w x h)
- Arm rest width: 4
- Cushion thickness: 4
- Hydraulic base: 36 x 23 (l x w)weight: 108 lbs
Shipping Dimensions:
- Length: 22 inches
- Width: 8 inches
- Height: 10 inches
- Weight: 5.5 lbs
Warranty
- 36 Month Structural and Frame
- 12 Month Upholstery
- 12 Month Pump and Gas Springs
- Lifetime After-Sales Service
- Use soft cleaning implements. Only clean your vinyl seats with soft sponges, dish cloths, and soft-bristled brushes. This will ensure your vinyl seats last for many years. Using steel wool, sharp cleaning tools, or similarly abrasive cleaning implements could cause your vinyl seating to tear.
- Wash your vinyl with soapy water. Mix a small amount of mild dish soap with warm water until the mixture is sudsy. Dip a soft-bristled brush or soft cloth in the water. Scrub the vinyl seats until clean.
- **Do not use abrasive cleaning compounds. **Undiluted bleach, for instance, is too caustic to use on vinyl. Over time, cleaning your vinyl seats with bleach will cause them to break down.[6] Likewise, avoid cleaning compounds containing:
- concentrated detergents
- silicone oils
- waxes
- petroleum distillates
- dry cleaning fluids
- solvents
- acid-based cleaners
- Disinfectant Use. If disinfection is required, use Madacide-FD wipes or spray. Madacide-FD contains 21% isopropyl alcohol; do not exceed a total alcohol concentration of 25%. Apply briefly—do not allow the solution to remain on the surface for more than a few seconds before wiping. Ensure the surface is completely dry before use. DO NOT USE CAVICIDE OR CAVIWIPES. THIS WILL DAMAGE THE VINYL.
- Application of Plastic Wrap. Before applying plastic wrap, lightly mist the vinyl surface with distilled water. This helps prevent the plastic from adhering to the vinyl and allows for easy removal. For added protection, consider placing a dental bib or a bed/drape sheet between the vinyl and the plastic wrap to create an additional barrier.